CCNP Collaboration 350-801 Practice Test Engine: Try These 390 Exam Questions
Guaranteed Success in CCNP Collaboration 350-801 Exam Dumps
NEW QUESTION # 72
An engineer must enable onboarding of on-premises devices by using activation to a Cisco UCM server The engineer activated the CISCO Device Activation Service and set the default registration method to use the codes. Which action completes the configuration?
- A. Generate 16-digit codes by using the Bilk Administration Tool
- B. Set Enable Activation Code enterprise parameter to True-
- C. Create a Bulk Administration Tool provisioning template.
- D. Manually provision new phones that have an activation code requirement
Answer: B
Explanation:
The engineer must set the Enable Activation Code enterprise parameter to True. This will enable the use of activation codes for onboarding on-premises devices to a Cisco UCM server. The other options are not necessary to complete the configuration.
Here are the steps to complete the configuration:
Log in to the Cisco Unified Communications Manager (CUCM) Administration interface.
Go to System > Enterprise Parameters.
Set the Enable Activation Code enterprise parameter to True.
Click Save.
The activation code onboarding feature is now enabled. You can use it to onboard new phones to the CUCM server.
NEW QUESTION # 73
Refer to the exhibit.
What is a possible cause of the PRI issue?
- A. The controller shut down.
- B. The framing is configured incorrectly.
- C. The clock source is incorrect.
- D. The cable is unplugged.
Answer: C
NEW QUESTION # 74
Refer to the exhibit.
An engineer verifies the configured of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?
- A. Device (config) # com-manager active
- B. Device(config)# ccm-manager enable
- C. Device(config)# mgcp enable
- D. Device (config)# mgcp
Answer: D
NEW QUESTION # 75
Due to service provider restriction, Cisco Unified Communications Manager cannot send video in the SDP. Which two options on Cisco Unified CM are configured to suppress video in the SDP is outgoing invites? (Choose two.)
- A. Change the Video Capabilities dropdown on the endpoint to Disabled.
- B. Set Video bandwidth in the Region settings to 0.
- C. Add the audio forced command to voice service voip on the Unified Border Elements.
- D. Check the Retry Call as Audio on the SIP trunk
- E. Check the Send send-receive SDP in mid-call INVITE check box on the SIP trunk SIP profile.
Answer: A,B
NEW QUESTION # 76
An administrator is integrating a Cisco Unity Express module to a Cisco UCME system A test call is placed to the Cisco Unity Express pilot number, but the administrator receives a busy signal. The dial-peer is configured as follows:
How is this issue resolved?
- A. The dial-peer needs to be reconfigured to support vad.
- B. The dial-peer needs to be reconfigured to support the G.711 voice codec.
- C. The dial-peer needs to be reconfigured to support H 323 instead of SIP.
- D. The destination pattern needs to be changed to match the dialed number of 4100.
Answer: B
NEW QUESTION # 77
Which two steps are required for bulk configuration transactions on the Cisco UCM database utilizing BAT? (Choose two)
- A. A data file in Extensible Markup Language format must be uploaded to Cisco UCM
- B. A data file in comma-separated values format must be uploaded to Cisco UCM
- C. A server template must be created in Cisco UCM.
- D. A device template must be created in Cisco UCM.
- E. A data file in Abstract Syntax Notation One format must be uploaded to Cisco UCM
Answer: A,B
NEW QUESTION # 78
An administrator troubleshoots call flows and suspects that there are issues with the dial plan Which tool enables a quick analysis of the dial plan and provides call flows of dialed digits?
- A. Dial Plan Analyzer
- B. Dialed Number Analyzer
- C. Digit Analysis Analyzer
- D. Cisco Dial Plan Analyzer
Answer: B
NEW QUESTION # 79
Which recommendation is the best practice for marking video and voice media in a cisco Unified Communications network?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: D
NEW QUESTION # 80
Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?
- A. Dial the self-provisioning IVR extension and associate the phone to an end user.
- B. Enter settings menu on the phone and press *,*,# (star, star, pound).
- C. Ask the Cisco UCM administrator to associate the phone to an end user.
- D. Dial the hunt pilot extension and associate the phone to an end user.
- E. Plug the phone into the network.
Answer: A,E
NEW QUESTION # 81
Which external DNS SRV record must be present for Mobile and Remote Access?
- A. _cisco-uds._tcp.example.com
- B. _collab-edge._tls.example.com
- C. _collab-edge._tcp.example.com
- D. _cisco-uds._tls example.com
Answer: B
NEW QUESTION # 82
Drag and drop the SNMPv3 message types from the left onto the corresponding definitions on the right.
Answer:
Explanation:
NEW QUESTION # 83
A company deploys centralized cisco ucm architecture for a hub location and two remote sites.
- The company has only one ITSP connection at the hub connection, and
ITSP supports only G.711 calls
- Remote site A has a 1-Gbps fiber connection to the hub connection and calls to and from remote side A use G.711 codec
- Remote site B has a 1 T1 connection to the hub location and calls to
and from remote site B use G.729 codec
Based on the provided guidance, a Cisco voice engineer must design media resource management for the customer. What is the method that needs to be followed?
- A. configure the hardware transcoder on the site A router.
- B. configure the hardware transcoder on the hub location router.
- C. configure the software transcoder on Cisco UCM to support voice calls to and from both remote sites.
- D. configure the hardware transcoder on the site B router.
Answer: B
Explanation:
Site B has a T1 connection and we don't want to force them to limit the number of calls. As an administrator, i would take the incoming calls from site B in G729 and do a transcode at the hub location, and receive an Incoming call to Site B in G 711 and transcode it to G729 and traverse over T1.
NEW QUESTION # 84
Refer to the exhibit. An engineer is troubleshooting a codec negotiation issue where both endpoints that are involved in the call support the codecs listed in the exhibit.
Which audio codec is selected il a call between two endpoints in Region 1 is placed?
- A. G.711a
- B. G.722
- C. G.711u
- D. G.729
Answer: B
NEW QUESTION # 85
Where in Cisco UCM are codec negotiations configured for endpoints?
- A. in enterprise parameters
- B. under device profiles in device settings
- C. under regions using preference lists
- D. in in-service parameters
Answer: C
NEW QUESTION # 86
A Cisco Unity Connection Administrator must set a voice mailbox so that is can be accessed form a secondary device. Which configuration on the voice mailbox makes this change?
- A. Mobile User
- B. Alternate Names
- C. Attempt Forward routing rule
- D. Alternate Extensions
Answer: D
NEW QUESTION # 87
A company wants to provide remote users with access to its on-premises Cisco collaboration features. Which components are required to enable Cisco Mobile and Remote Access for the users?
- A. Cisco Unified Border Element, Cisco UCM, and Cisco Video Communication Server
- B. Cisco Expressway-E, Cisco Expressway-C, and Cisco UCM
- C. Cisco Unified Border Element, Cisco IM and Presence Server, and Cisco Video Communication Server
- D. Cisco Expressway-E, Cisco IM and Presence Server, and Cisco Video Communication Server
Answer: B
NEW QUESTION # 88
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider.
Which set of commands allows the engineer to complete the task without compromising voice quality?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 89
How does an administrator make Cisco IP phone display the lest 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?
- A. Configure a calling party transformation pattern that keeps only last 10 digits.
- B. Change the service parameter Apply Transformations On Remote Number to True.
- C. Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXXX.
- D. On the inbound SIP trunk, change Significant Digits to 10.
Answer: B
Explanation:
The outbound call's calling party transformation CSS (also referred to as localization or remote number calling party transformation CSS) can also be used to localize remote connected party information.
To enable this, the advanced service parameter Apply Transformations On Remote Number must be enabled.
NEW QUESTION # 90
An engineer with ID012345678 must build an international dial plan in Cisco Unified Communications Manager.
Which action should be taken when building a variable-length route pattern?
- A. Set up all international route pattern to 0.1
- B. Configure single route pattern for international calls
- C. Reduce the T302 timer to less than 4 seconds
- D. Create a second route pattern followed by the # wildcard
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/dialplan.html
NEW QUESTION # 91
Refer to the exhibit. Which action must an engineer take to implement self-provisioning on a primary communications manager server?
- A. Select a different Universal Line Template.
- B. Uncheck the auto-registration Disabled checkbox.
- C. Change the SIP Phone Secure Port.
- D. Select a different Universal Device Template.
Answer: B
NEW QUESTION # 92
Refer to the exhibit. An administrator configured a codec preference list with G.722 and ILBC codecs. Which change must the administrator make in the dial-peer section of the configuration to use this list?
- A. add voice-class codec 20
- B. add session codec 20
- C. add voice-codecs 20
- D. add codec preference 20
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/voi-negt- aud-code.html
NEW QUESTION # 93
Which recommendation is the best practice for marking video and voice media in a cisco Unified Communications network?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: D
NEW QUESTION # 94
Refer to the exhibit. In this cisco UCM setup configured for EARLY offer, what is the codec preference line in the initial SIP INVITE SDP?
- A. m=audio 16444 RTP/AVP 9 18 101
- B. m=audio 16444 RTP/AVP 0 8 18 101
- C. m=audio 16444 RTP/AVP 18 101
- D. m=audio 16444 RTP/AVP 9 0 8 18 101
Answer: D
NEW QUESTION # 95
When a new SIP phone Is registered to Cisco Unified Communications Manager, it keeps failing and showing an "unprovisioned" error message in the phone display. Which problem is a possible cause of this issue?
- A. The DHCP settings are set incorrectly and the phone does not have an alternate TFTP defined.
- B. Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the phone device does not have a DN configured.
- C. The DN assigned to the phone is already in use by another SIP phone.
- D. The DN configuration for this phone is shared with an SCCP phone. which is not supported.
- E. The phone cannot download and install the latest firmware.
Answer: E
NEW QUESTION # 96
......
Test Engine to Practice 350-801 Test Questions: https://torrentpdf.exam4tests.com/350-801-pdf-braindumps.html