VMCE2021 Questions - Truly Beneficial For Your Veeam Exam (Updated 102 Questions) [Q11-Q36]

Share

VMCE2021 Questions - Truly Beneficial For Your Veeam Exam (Updated 102 Questions)

View All VMCE2021 Actual Exam Questions, Answers and Explanations for Free

NEW QUESTION 11
Which storage optimization option uses a block size of 512 KB?

  • A. LAN target
  • B. Local target
  • C. Local target (large blocks)
  • D. WAN target

Answer: A

 

NEW QUESTION 12
Which of the following Veeam Backup & Replication jobs can use integration with secondary arrays as a data source?

  • A. Backup
  • B. Tape backup
  • C. VM copy
  • D. Replication

Answer: A

 

NEW QUESTION 13
An Availability engineer has configured Veeam Backup & Replication to replicate a mission critical VM to a DR site on an hourly basis and with 24 restore points. The production site has suffered a storage failure and needs to bring up the mission critical machine as soon as possible. Which step should the Availability engineer do next?

  • A. Create a failover plan
  • B. Failover to the replica VM
  • C. Failback of the replica VM
  • D. Planned failover to me replica VM

Answer: B

 

NEW QUESTION 14
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?

  • A. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
  • B. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
  • C. Use backup jobs to back up directly to tape; ship the tapes off site
  • D. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode

Answer: A

 

NEW QUESTION 15
When you back up regular or standalone VMs in vCloud Director, which of the following is captured and stored in Veeam's Backup & Replication backup file? (Choose three.)

  • A. Linked clone VM's prior to vCenter 6.5
  • B. vApp metadata
  • C. VM metadata
  • D. VM disk content
  • E. Raw device mapping
  • F. In-guest iSCSI disk

Answer: B,C,D

 

NEW QUESTION 16
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?

  • A. Aggregated data every two hours
  • B. Data does not exist
  • C. Raw data every 20 seconds
  • D. Aggregated data every five minutes

Answer: D

Explanation:
Explanation
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100

 

NEW QUESTION 17
If your mount server is running Windows Server 2019 and you are performing a sacure restore, which statement below is true?

  • A. NTFS is the only format supported.
  • B. RefS will be processed and scanned.
  • C. RefS will be skipped.
  • D. Storage Spaces disks will be processed and scanned.

Answer: A

 

NEW QUESTION 18
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?

  • A. Use the preferred network settings to switch to data network for the backup traffic
  • B. Create a global network traffic rule, set appropriate source and target IP range
  • C. Update routing tables on the components involved in data transfer
  • D. Re-add all Veeam components involved in data transfer through the required interfaces

Answer: A

Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/select_backup_network.html?ver=100

 

NEW QUESTION 19
When configuring a SureBackup job, what are some of the criteria for adding servers to an application group?
(Choose two.)

  • A. VM backups must reside on the same repository
  • B. VMs must have at least one valid restore point
  • C. VMs cannot be added to an application group twice
  • D. VMs must be running the same OS version
  • E. VMs cannot be encrypted

Answer: B,C

 

NEW QUESTION 20
Veeam is used for replicating VMware VMs. The production environment is comprised of two networks:
192.168.1.0/24 and 172.16.0.0/16. A web application requires a database server (whose IP address is
172.21.0.12) to receive queries from a web client (whose IP address is 192.168.1.32). The replicas are spread over multiple hosts. A backup administrator needs to configure a virtual lab to test a web client to database server query. Which of the following virtual lab types must be configured?

  • A. All virtual lab configurations would support that
  • B. Advanced multi-host
  • C. Basic single-host
  • D. Advanced single-host

Answer: D

 

NEW QUESTION 21
A company has been running off replicated, business-critical VMs at their disaster recovery location since an earthquake near the primary data center occurred. Since the threat has passed, they want to stop the replicas and switch to the VMs at the primary data center without losing data. Which of the following actions is the first step they should take?

  • A. Commit failback
  • B. Undo failover
  • C. Failback to production
  • D. Planned failover
  • E. Failover
  • F. Permanent failover

Answer: C

 

NEW QUESTION 22
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?

  • A. Forward incremental with optional periodic synthetic and/or active full backups
  • B. Reverse incremental with periodic active full backups
  • C. Reverse incremental with optional periodic synthetic full backups
  • D. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups

Answer: A

Explanation:
Explanation
https://helpcenter.veeam.com/docs/agentforwindows/userguide/backup_chain.html?ver=40

 

NEW QUESTION 23
Which Veeam Backup & Replication functionality allows a VM to be powered on directly from a backup file?

  • A. Item-Level Recovery using Veeam Explorer
  • B. Planned failover
  • C. Full VM Recovery
  • D. Instant VM Recovery

Answer: D

 

NEW QUESTION 24
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m. and the administrator fails over the replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m.
and checks the state of the original VM. They recognize that not all data is available. What is missing?

  • A. Data from 7 a.m. to 8 a.m.
  • B. Data from 8 a.m. to 2 p.m.
  • C. Data from 1 a.m. to 7 a.m.
  • D. Data from 1 a.m. to 2 p.m.

Answer: C

Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/failback.html?ver=100

 

NEW QUESTION 25
Which transport mode uses the VMware vSphere Hot-Add feature to attach the virtual disks of a source VM to the backup proxy VM?

  • A. Virtual Appliance
  • B. Network
  • C. vPower
  • D. Direct SAN access
  • E. Direct NFS access

Answer: A

 

NEW QUESTION 26
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?

  • A. Instant VM Recovery with "staged restore"
  • B. Virtual disk restore
  • C. SureBackup
  • D. Instant VM Recovery with "secure restore"

Answer: D

 

NEW QUESTION 27
Select the correct description of a synthetic full backup.

  • A. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
  • B. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
  • C. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
  • D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file

Answer: C

 

NEW QUESTION 28
A backup administrator is creating a SureBackup environment up using Hyper-V as the hypervisor. Which virtual labs are available for Hyper-V? (Choose two.)

  • A. Advanced single-host (automatic configuration)
  • B. Advanced multi-host (manual configuration)
  • C. Basic single-host (automatic configuration)
  • D. Advanced single-host (manual configuration)
  • E. Advanced multi-host (automatic configuration)

Answer: C,D

 

NEW QUESTION 29
Which of the following predefined tests can be performed during a SureBackup verification test on a backup file? (Choose three.)

  • A. Application test
  • B. Boot time
  • C. OS test
  • D. SAN check
  • E. Heartbeat test
  • F. Ping test

Answer: A,E,F

 

NEW QUESTION 30
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?

  • A. In the reporter portal in the dashboards tab, VM performance dashboard
  • B. In the reporter portal in the workspace tab, VM performance
  • C. In the monitor client under the infrastructure view
  • D. In the monitor client under the data protection view

Answer: C

 

NEW QUESTION 31
Which of the following services are installed on every Veeam backup proxy server? Choose two options.

  • A. Veeam Data Mover Service
  • B. Veeam Backup Service
  • C. Veeam Distribution Service
  • D. Veeam Backup Catalog Service
  • E. Veeam Installer Service

Answer: A,E

Explanation:
Explanation
Refer to https://helpcenter.veeam.com/docs/backup/vsphere/backup_proxy.html?ver=100

 

NEW QUESTION 32
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?

  • A. Use Instant VM Recovery
  • B. Use a planned failover
  • C. Use a failover plan
  • D. Use on-click failover

Answer: C

 

NEW QUESTION 33
Exhibit:

Look at the diagram. This daily backup job has been running for over 30 days and no active full backups have been taken since the first run. Which of the following best describes the backup job?

  • A. This is forever forward incremental backup, keeping seven restore points
  • B. This is a forward incremental backup with Sunday and Wednesday synthetic full, keeping seven restore points
  • C. This is a reverse incremental backup, keeping seven restore points
  • D. This is a forward incremental backup with transform enabled, keeping four restore points

Answer: C

 

NEW QUESTION 34
Figure A shows the backup files on a Scale-out Backup Repository (SOBR) created by a single Veeam backup job. The SOBR is configured to offload to capacity tier in move mode. If the offload was completed successfully, what will remain on the performance extents for the files uploaded to the capacity tier?

  • A. VBM files (metadata only)
  • B. VIB and VBK files (data blocks only)
  • C. VBK files (metadata and data)
  • D. VIB files (metadata and data)
  • E. VIB and VBK files (metadata only)

Answer: E

 

NEW QUESTION 35
Which of the following can help reduce the amount of traffic that is sent over the network during the second run of a replication job?

  • A. Replica seeding
  • B. Re-IP rules
  • C. WAN acceleration for replicas
  • D. Replica mapping

Answer: A

Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/replica_seeding.html#:~:text=Replica%20seeding%20and%2

 

NEW QUESTION 36
......

VMCE2021 dumps Free Test Engine Verified By It Certified Experts: https://torrentpdf.exam4tests.com/VMCE2021-pdf-braindumps.html