[Nov-2023] Use Real NS0-162 Dumps Free Sample Questions and Practice Test Engine
Pass Network Appliance NS0-162 exam - questions - convert Tets Engine to PDF
Network Appliance NS0-162 certification exam is designed for professionals who want to validate their skills and knowledge in managing and administering NetApp data storage solutions. NetApp Certified Data Administrator, ONTAP certification exam is a part of the NetApp Certified Data Administrator (NCDA) program, which is aimed at IT professionals who work with NetApp data storage systems. The NS0-162 exam focuses on testing the candidates' skills and knowledge in administering NetApp ONTAP data storage solutions.
The NS0-162 certification exam is suitable for IT professionals who have experience in managing and administering data storage and management systems. NS0-162 exam is ideal for data administrators, storage administrators, system administrators, and IT professionals who work with NetApp ONTAP software. To take the exam, candidates should have a good understanding of storage protocols, network infrastructure, and storage management principles.
Network Appliance NS0-162 exam is an industry-recognized certification exam that focuses on validating the skills and knowledge of IT professionals who want to become NetApp Certified Data Administrators, ONTAP. NetApp Certified Data Administrator, ONTAP certification is designed to demonstrate proficiency in NetApp ONTAP storage solutions, including configuration, management, and troubleshooting. Passing NS0-162 exam is a testament to the candidate's ability to manage and administer NetApp storage environments effectively.
NEW QUESTION # 13
You are the administrator of your company's ONTAP 9.7 systems. You have an AFF A220 in your main data center and a FAS2720 at a second data center on the same campus. You must ensure the highest possible rate of data security and availability with all snapshots.
In this scenario, which ONTAP solution do you implement?
- A. a SnapMirror Synchronous relationship between AFF and FAS
- B. a SnapMirror relationship with an update interval of one minute
- C. an SVM-DR relationship with identity preserve enabled for your SVMS
- D. an SVM-DR relationship with identity preserve disabled for your SVMs
Answer: C
NEW QUESTION # 14
Exhibit.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
- A. NFS
- B. ISCSI
- C. SMB
- D. NVMe
Answer: A,B
Explanation:
Reference:
https://cloud.netapp.com/hubfs/ONTAP_Cloud_FAQs-final.pdf
NEW QUESTION # 15
You are configuring an ONTAP cluster to use NV Me/FC.
In this scenario, which two statements are true? (Choose two.)
- A. Create an SVM with NV Me enabled.
- B. Create an SVM with both NV Me and FC protocols enabled.
- C. Create and start the FC service.
- D. Create NV Me LIFs on FC target ports.
Answer: A,D
NEW QUESTION # 16
You want to scale out storage performance for read-Intensive data across multiple locations. In this scenario, which NetApp feature accomplishes this task?
- A. FlexVol
- B. FlexCache
- C. FlexClone
- D. Flash Pool
Answer: C
NEW QUESTION # 17
Click the Exhibit button.
You are the administrator of your company's ONTAP 9.7 storage system. You try to connect your vSphere hosts to a newly created NFS datastore and receive the error message shown in the exhibit.
What must you do to solve this problem?
- A. Change the volume security style to UNIX.
- B. Set the MTU size for the data LIF to 9000.
- C. Activate all NFS protocol versions in your SVM.
- D. Add the vSphere host's IP addresses to an export policy rule.
Answer: A
NEW QUESTION # 18
Which two types of capacity tiers are supported with FabrlcPool aggregates In ONTAP 9.8? (Choose two.)
- A. SWIFT Object Store
- B. StorageGRID Object Storage
- C. NFS Export
- D. S3 Object Store
Answer: B,C
NEW QUESTION # 19
Your company has purchased two NetApp AFF A400 HA pairs. During deployment, how many root aggregates are created?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 20
You want to prevent a single file from filling up a single constituent in a FlexGroup.
Which FlexGroup feature in ONTAP 9.7 will accomplish this task?
- A. Snapshot autodelete
- B. fractional reserve
- C. elastic sizing
- D. Flash Pool
Answer: C
NEW QUESTION # 21
Exhibit
You have Installed a new ONTAP 9.8 cluster and want to move the e0e and e0c ports into a new broadcast domain. Referring to the exhibit, which action satisfies this requirement?
- A. Use the irrDadcast-domain create command
- B. Use the broadcast-domain split command.
- C. Use the broadcast-domain= merge command.
- D. Use ONTAP System Manager to create a new broadcast domain.
Answer: B
NEW QUESTION # 22
Exhibit.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
- A. ISCSI
- B. SMB
- C. NFS
- D. NVMe
Answer: A,D
NEW QUESTION # 23
Which three steps are required to serve NFS exports from your ONTAP system? (Choose three.)
- A. You must license NFS.
- B. You must license CIFS.
- C. You must create an SMB share.
- D. You must create an export policy rule.
- E. You must have provisioned a volume to export.
Answer: A,D,E
NEW QUESTION # 24
Click the Exhibit button.
Only the hosts that are on the 10.1.100.0/24 network can access CIFS shares on SVM lab-fs1.
Referring to the exhibit, what would you do to allow hosts on other networks to access lab-fs1?
- A. Delete the route with gateway 192.168.106.1.
- B. Decrease the metric of the route with gateway 10.1.100.1.
- C. Increase the metric of the route with gateway 10.1.100.1.
- D. Create a SVM default route for 10.1.100.1.
Answer: D
NEW QUESTION # 25
Exhibit.
Miss-----------------
The availability of the remote cluster in the peering relationship shows "Partial." Referring to the exhibit, what is the reason for this status message?
- A. Some nodes In the local cluster are not able to contact some or all nodes in the remote cluster.
- B. The remote cluster does not have its cluster license applied properly.
- C. The local cluster is unable to authenticate successfully to the remote cluster.
- D. The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.
Answer: B
NEW QUESTION # 26
Exhibit.
You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task?
- A. Active 1Q Unified Manager
- B. NetApp Hardware Universe (HWU)
- C. NetApp Interoperability Matrix (IMT)
- D. Active IQ Conflg Advisor
Answer: B
NEW QUESTION # 27
Your company wants to Increase access security In both their NFS and ISCSI environments. Currently ISCSI Is not authenticated and NFS relies only on export policies for security.
Which two enhancements do you use to satisfy this new criteria? (Choose two.)
- A. Enable Kerberos for iSCSI LUN access.
- B. Enable Kerberos for NFS exports.
- C. Enable Challenge-Handshake Authentication Protocol (CHAP) for ISCSI LUN access.
- D. Enable Challenge-Handshake Authentication Protocol (CHAP) for NFS exports.
Answer: B,C
NEW QUESTION # 28
An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements?
- A. SyncMlrror
- B. SVM Disaster Recovery (SVM DR)
- C. SnapMirror Business Continuity (SM-BC)
- D. SnapMirror Synchronous (SMS)
Answer: C
NEW QUESTION # 29
Click the Exhibit button.
The exhibit displays the values for the default adaptive QoS policy. An administrator assigns the Value policy to a 1TB volume. Over time, the volume expands to 3TB.
What is the peak IOPS for the volume, both before and after the expansion?
- A. 75 IOPS and 512 IOPS
- B. 512 IOPS and 12288 IOPS
- C. 512 IOPS and 1536 IOPS
- D. 512 IOPS and 512 IOPS
Answer: D
NEW QUESTION # 30
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The volume is not mounted In the namespace.
- B. The host IP address does not match the export policy rule.
- C. The logical Interface does not allow the NFSv3 protocol.
- D. The volume is in read-only.
Answer: A
Explanation:
The volume is not mounted in the namespace. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.cdot-famg-nfs%2FGUID-8E400D78-B405-4682-8F33-143783F2D580.html Even if the volume was read only it could be mounted - also the client IP is in the desired range and LIF is configured for NFS.
NEW QUESTION # 31
You are an administrator that manages a number of mission-critical applications that use block protocols only. The business unit requires the fastest storage failover.
In this scenario, which ONTAP solution satisfies the requirement?
- A. FAS with symmetric active-active topology
- B. ONTAP Select with Asymmetric Logical Unit Access (ALUA)
- C. All SAN Array (ASA) with symmetric active-active topology
- D. AFF with Asymmetric Logical Unit Access (ALUA)
Answer: C
NEW QUESTION # 32
You need to Increase the number of files that can be created In a volume. Which two methods enable you to achieve this goal? (Choose two.)
- A. Increase the number of files permitted on the volume.
- B. Increase the size of the volume.
- C. Set the space guarantee to 'volume".
- D. Set the fractional reserve to "0".
Answer: B,C
NEW QUESTION # 33
......
Pass Your NS0-162 Exam Easily - Real NS0-162 Practice Dump Updated Nov 22, 2023: https://torrentpdf.exam4tests.com/NS0-162-pdf-braindumps.html