[Apr 21, 2024] Pass 350-601 Review Guide, Reliable 350-601 Test Engine
350-601 Test Engine Practice Test Questions, Exam Dumps
Cisco 350-601 DCCOR certification exam is a highly sought-after certification in the IT industry. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification validates the candidate's knowledge and skills in implementing data center technologies and demonstrates their expertise in using Cisco technologies. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification also helps candidates to enhance their career prospects by providing them with better job opportunities and higher salaries. Cisco is a leading provider of networking and data center technologies, and obtaining the Cisco 350-601 DCCOR certification is a significant achievement for IT professionals who want to advance their careers in this field.
NEW QUESTION # 33
Refer to the exhibit.
Why does the python code for Cisco NX-API print error message?
- A. The "type" is wrong is the body of the request and should be "cli_ conf".
- B. The JSON is not a supported format for the NX-API.
- C. NX-API does not allow configuration for features via the requests module.
- D. The "type" is wrong in the header of the request and should be "cli_ conf".
Answer: A
NEW QUESTION # 34
An engineer must implement Strict Unicast Reverse Path Forwarding mode for IPv4 packets on the Ethernet1/1 interface on the Cisco Nexus 9500 Series Switch. Which configuration achieves this goal?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 35
APIC EPG Resolution Immediacy is set to "Immediate".
Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?
- A. If "Immediate" is selected, the policy is programmed in the hardware as soon as the leaf is booted.
- B. The "Immediate" and "On demand" options require a port group to be created on the VDS.
- C. If "On demand" is selected, the policy is programmed in the hardware only when the first packet is received through the data path.
- D. If "On demand" is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG.
Answer: C
Explanation:
Section: Network
NEW QUESTION # 36
An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?
- A. The upgrade stops
- B. The zone merge executes and then the upgrade completes.
- C. The zone merge pauses until the upgrade completes
- D. The zone merge stops.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/upgrade/602_N2_2/n5500_upgrade_downgrade_602_n2_2.html
NEW QUESTION # 37 
Refer to the exhibit. A host with source address 10.10.10.10. sends traffic to multicast group 239.1.1.1. how do the vPC switches forward the multicast traffic?
- A. If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only one Po20.
- B. If multicast traffic is received on Switch over the vPC peer-link, the traffic is dropped.
- C. If multicast traffic is received on Po11 and Switch2, the traffic is dropped.
- D. If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/multicast/214140-multicast-forwarding-in-vpc-based-on-loc.html
NEW QUESTION # 38
A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight management portal.
Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)
- A. device ID
- B. device FQDN
- C. device claim code
- D. device serial number
- E. device public IP address
Answer: B,E
NEW QUESTION # 39
Refer to the exhibit.
Which two statements about the routing table of the leaf switch are true? (Choose two.)
- A. 10.20.1.0./24 is a BD subnet in ACI.
- B. 172.16.100.0/24 is a BD subnet in ACI.
- C. The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in ACI.
- D. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
- E. The next hop 10.0.8.65 for route 10.20.1.0./24 is the TEP address of a border leaf in ACI.
Answer: A,C
NEW QUESTION # 40
Which data structure results from running this Python code?
- A. list
- B. tuple
- C. set
- D. dictionary
Answer: D
Explanation:
Reference:
https://www.geeksforgeeks.org/read-json-file-using-python/
NEW QUESTION # 41
Refer to the exhibit.
What is the reason the system-fm-vrrp checkpoint was created?
- A. The VRRP-enable feature has been disabled.
- B. The VRRP service restarted and the checkpoint was automatically created.
- C. The network administrator manually created it.
- D. The VRRP process crashed and the checkpoint was automatically created.
Answer: A
NEW QUESTION # 42
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action must be taken?
- A. NPIV must be enabled on the upstream switch.
- B. A port channel must be configured to the upstream switch.
- C. All switches in the fabric must be Cisco MDS switches.
- D. The FCNS database must be disabled in the fabric.
Answer: A
NEW QUESTION # 43
Refer to the exhibit.
What is configured as a result of running these commands?
- A. loose unicast RPF
- B. strict unicast RPF
- C. IP Source Guard
- D. reverse lookup for outbound packets
Answer: B
NEW QUESTION # 44
An engineer must perform a nondisruptive software upgrade on a dual supervisor Cisco Nexus 7000 series switch. What is the cause of the upgrade being disruptive?
- A. Change of the configuration settings or the network connections during the upgrade process
- B. The show install all impact command is not issued Before the upgrade
- C. Attempt to simultaneously upgrade more than three cards
- D. The kickstart image is installed by using the install all kickstart image system image command
Answer: A
NEW QUESTION # 45
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
NEW QUESTION # 46
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Answer:
Explanation:
Explanation
1- feature netflow
2- flow monitor
3- Interface <interface>
4- flow exporter
NEW QUESTION # 47
Which two statements about the process of upgrading an EPLD on a Cisco MDS 9000 series Switch are correct? (Choose two.)
- A. EPLD upgrades can be completed without powering down the module during the upgrade.
- B. An upgrade verification identifies the impact of each EPLD upgrade.
- C. The EPLDs for all the modules on a switch must be upgraded at the same time.
- D. EPLDs can be upgraded only to the latest EPLD image.
- E. EPLDs can be upgraded without replacing the hardware.
Answer: A,E
NEW QUESTION # 48
Which two actions should be performed before upgrading the infrastructure and firmware of multiple UCS blades? (Choose two)
- A. Enable Smart Call Home feature during the firmware upgrade process
- B. Get Full State and All Configuration backup files before beginning the upgrade
- C. Run the Check Conformance feature to verify that all your components are running the compatible firmware version after the upgrade
- D. Verify if the bootflash on the fabric interconnects m the Cisco UCS has at least 15°* available space
- E. Verify if the bootflash on the fabric interconnects in the Cisco UCS has at least 10% available space
Answer: B,C
NEW QUESTION # 49
Refer to the exhibit.
An engineer configures port security on a Cisco Nexus 9000 Series Switch. The requirement is to prevent any newly learned MAC addresses from forwarding traffic on the interface. Also, the already learned MAC addresses must not be affected by the changes. Which configuration meets these requirements?
- A. switchport port-security violation isolate
- B. switchport port-security violation shutdown
- C. switchport port-security violation restrict
- D. switchport port-security violation protect
Answer: D
NEW QUESTION # 50
......
100% Free 350-601 Daily Practice Exam With 455 Questions: https://torrentpdf.exam4tests.com/350-601-pdf-braindumps.html